Signs you need a new roof — a guide for homeowners
If you’re here, you probably want a straight answer: should you repair the roof you have, or is it time to replace it before the next storm makes the decision for you? That’s the question many northern New Jersey homeowners are asking as material costs stay high and older homes continue to age.
You also want more than a list of symptoms. You want to know what to expect in terms of cost, whether your town requires a permit, what insurance may cover, and how to choose a contractor you can trust. In 2026, rising property values, closer attention to the New Jersey Uniform Construction Code, and an aging housing stock are pushing more homeowners toward full replacement instead of repeated patchwork repairs.
That’s why it pays to catch the warning signs now, not later. A roof problem that looks minor from the driveway can hide wet sheathing, attic mold, failed flashing, or ventilation issues that drive up heating and cooling costs. Delayed action often turns a manageable exterior job into a bigger structural and insulation project.
Below you’ll find a quick checklist of warning signs, a safe step-by-step inspection routine you can do at home, permit and cost guidance for New Jersey, contractor evaluation criteria, and practical next steps. We also explain what a permit-managed process looks like and how a licensed contractor such as Isaac and Son Construction approaches documentation, pricing, and local code compliance. Use this as a decision framework before you spend money in the wrong place.
Why older homes here face tougher roofing decisions
Roofing decisions in this area are rarely simple because the local housing stock is old. According to U.S. Census housing data, a large share of New Jersey homes were built before 1980, and in many established Bergen County neighborhoods, homes are now well over 40 years old. That matters because roof systems installed decades ago often predate current underlayment practices, modern ice barrier requirements, and stricter ventilation standards. Many of the warning signs homeowners notice on the surface actually point to hidden, age-related failure inside the roof assembly.
Local weather makes the problem worse. Freeze-thaw cycles can widen small cracks, ice dams can force water under shingles, and summer storms can loosen tabs that already have weakened seal strips. The U.S. Department of Energy offers practical guidance on roof and attic performance at Energy.gov, and that guidance lines up with what we see in local homes: ventilation and moisture control often decide whether a roof reaches the end of its expected lifespan early or lasts as long as it should.
Regulation is another factor. The NJ Department of Community Affairs oversees the New Jersey Uniform Construction Code, but enforcement happens through local towns. Many municipalities are reviewing reroof permits more closely these days, especially when flashing, sheathing, or structural conditions are involved. Plan review timelines vary by township, and inspections may be required at tear-off, sheathing repair, and final completion stages.
A hypothetical example helps illustrate this. A mid-century colonial with plank sheathing and recurring leaks may require decking replacement to meet current standards once the old roof is removed. A newer home with a single existing layer and sound sheathing may sometimes qualify for limited recover work, depending on local rules and material condition. Either way, homeowners shouldn’t assume a repair-only approach will automatically satisfy code or protect the house.
Your best move is simple: call your township building office before authorizing any work, confirm permit requirements, and compare that guidance against a licensed contractor’s written scope. Checking local code requirements first can save you from code, insurance, and resale headaches down the road.
The warning signs worth taking seriously
The fastest way to avoid costly surprises is to recognize failure patterns early. Below are the eight warning signs it’s time to replace your roof, based on manufacturer lifespan guidance, industry cost context, and common failure patterns we see in homes throughout the region: cupped shingles, storm damage, rotted decking, attic mold, and ventilation-related overheating.
Each sign below includes a simple way to check it and a practical next step. Not every symptom means you need full replacement today. Still, when several symptoms show up together, the odds shift. In our experience, homeowners who wait until a stain appears on a bedroom ceiling are often months behind schedule. The goal here is to help you catch problems early enough to compare bids, line up permits, and get work scheduled before winter or storm season.
Use these signs as a decision tool, not a substitute for a licensed inspection. If you’re seeing three or more of these conditions at once, or even one major structural symptom, it’s time to stop treating the issue as theoretical.
1) Shingles are curling, cupping, or blistering
Curled edges, cupped centers, and blistered surfaces usually mean the shingles are aging out or the roof assembly has moisture and heat issues. You can do a safe first check from the ground with binoculars. Look for tabs lifting upward, a warped surface, or uneven texture across one whole roof plane rather than one isolated patch.
Asphalt shingles typically last somewhere between 15 and 30 years depending on type, exposure, and attic ventilation. Basic 3-tab products tend to show end-of-life symptoms sooner, especially if the attic runs hot or storm exposure is high. Widespread curling across a large portion of the visible roof surface is a strong signal that patching won’t buy you much time.
For example, an older bungalow with heavy cupping across one slope might seem like a candidate for a simple patch. But a patch won’t match the brittle surrounding shingles or stop progressive failure. Full replacement costs more upfront, but it solves the underlying issue and avoids repeated service calls down the road.
We recommend taking clear photos, saving any maintenance records, and noting where curling is concentrated. If there’s an active leak, temporary tarping may help limit damage until a contractor arrives. If the distortion is widespread, schedule a professional inspection instead of paying for cosmetic spot fixes.
2) Missing granules in gutters or bald spots
Granules are not just cosmetic. They shield asphalt from UV exposure, help with fire resistance, and improve weathering performance. When those granules wash into gutters or leave bald patches on the shingle surface, the asphalt mat underneath can age fast.
Most asphalt roofs shed some granules early and late in life, but heavy gutter buildup is different. Significant granule loss often accelerates in the final years of a roof’s usable life. If a large share of visible shingles show bald spots, or your downspouts carry gritty runoff after every heavy rain, replacement planning should move higher on your list.
A simple diagnostic step works well. After a windstorm or hard rain, check the gutters and splash blocks for black, sand-like debris. Then compare several roof slopes from the ground. If one side is much more worn, sun exposure or storm direction may be speeding up failure.
Your next move should be practical. Get at least two written quotes that include tear-off, disposal, underlayment upgrades, and any ventilation corrections. A repair may still make sense for isolated damage, but widespread granule loss usually points to a roof with little protective margin left.
3) Repeated leaks or widespread water stains
One leak does not always mean the whole roof has failed. Repeated leaks after prior repairs are different. They can signal failing underlayment, worn valleys, cracked pipe boots, chimney flashing problems, or soaked decking that keeps trapping moisture.
A useful rule is to separate old stains from active ones. Old stains are dry, flat, and often discolored around the edges. Active leaks usually feel damp, spread after rain, or come with peeling paint, bubbling drywall, or attic moisture. Repeated patching over time can end up costing a meaningful share of what a full replacement would, while still leaving you closer to the next failure.
We see this often in split-level homes and older colonials. In some cases, repeated chimney-area leak repairs mask rotted sheathing and failed step flashing underneath. If the attic also shows mold growth, the project scope and urgency both increase. HUD has useful moisture guidance at HUD for homeowners dealing with persistent water problems.
Photograph stains, trace them in the attic if it’s safe to do so, and note whether they reappear after professional repairs. If mold is present, or stains keep returning in the same area, replacement should be discussed before you spend more on another patch that may not hold.
4) Daylight through roof boards or a sagging line
This is one of the most serious signs on this list. If you can see daylight through roof boards, or the roofline appears to sag, stop treating the problem as a simple roofing issue. At that point, the concern may include sheathing failure, framing movement, or long-term moisture damage.
Structural risk rises sharply once the deck is compromised. In many towns, structural corrections trigger expanded permit review under the New Jersey Uniform Construction Code, not just a standard reroof permit. That can change both timeline and scope, since the contractor may need to document framing conditions, replace sheathing, and coordinate inspections before the new roof covering goes on.
If you notice daylight in the attic, take three steps right away. First, avoid walking under visibly sagging sections if the condition seems severe. Second, contain interior water with buckets or plastic sheeting if there’s active dripping. Third, call a licensed contractor for immediate evaluation. Waiting through one more storm can turn a localized deck problem into a much larger structural repair.
We recommend staying out of the attic when the condition looks unsafe and getting professional help right away. Isaac and Son Construction, NJ HIC License #13VH01304900, provides structural assessment and permit-managed repair coordination across Bergen County and nearby northern New Jersey communities.
5) Shingles older than their expected lifespan
Roof age is one of the simplest decision tools, yet many homeowners don’t know theirs. Start with closing documents, old invoices, prior permit records, and seller disclosures. If those aren’t available, a contractor may be able to estimate age from shingle style, branding, or other material clues, though that method is less precise.
Typical service-life ranges still hold true in 2026. Basic 3-tab shingles tend to have the shortest lifespan. Architectural laminate shingles generally last longer. Metal, clay, or terra cotta systems can last decades longer with proper detailing and maintenance. A roof nearing the upper end of its expected lifespan deserves replacement planning even if it isn’t leaking yet.
Consider two scenarios. A roof with decent attic ventilation that’s getting older may still be functional on paper but is likely entering a riskier phase. A much older roof is generally beyond standard asphalt expectations and can affect resale negotiations, insurance underwriting, and buyer confidence.
If you can’t verify your roof’s age, act as if it has limited remaining life until proven otherwise. Unknown-age roofs often produce the most expensive surprises because homeowners postpone inspection and then discover structural issues only after tear-off begins.
6) Storm damage or sudden granule loss
Storm damage can shift a borderline roof into replacement territory fast. Wind can break the seal strip and lift shingles. Hail can bruise the mat and shorten service life. Tree limbs can crack the deck below the surface. Late-winter storms also raise the chance of ice dam damage along eaves and valleys.
Insurance coverage depends on cause, condition, and policy language. Carriers often look at roof age, maintenance history, whether damage is sudden and documented, and whether the adjuster sees a repairable isolated loss or broad storm-created failure. For broader guidance on severe weather risk, homeowners can review resources from NOAA and FEMA.
If you’re wondering whether insurance will cover replacement, the honest answer is: it depends. A newer roof with documented storm impact stands a better chance than one already near the end of its life with deferred maintenance. Homeowners tend to see better claim outcomes when they report damage quickly, preserve photos, and keep receipts for temporary protection like tarping.
Take these steps in order: photograph all visible damage, note the storm date, contact your insurer, prevent further water intrusion, and then schedule contractor estimates. Isaac and Son Construction helps homeowners document visible storm damage and supports permit-managed reroofing work throughout Bergen County and the surrounding area.
7) Rising energy bills or attic temperature swings
Sometimes the roof tells on itself through your utility bills before it ever leaks. A failing roof assembly can trap heat in summer, lose heat in winter, and force your HVAC system to run longer. The roof covering, underlayment, insulation, and ventilation all work together, so rising energy use can be a clue that the assembly is no longer performing well.
Energy.gov notes that proper attic sealing, insulation, and ventilation can improve comfort and energy performance. Blocked soffit vents, failed ridge vents, and overheated attics are common in older homes with replacement roofs that never received a matching ventilation upgrade.
There are easy checks you can do. Compare attic temperature to outdoor conditions on a hot afternoon. Look for compressed insulation, dark staining around vents, and signs that soffit pathways are blocked. If you have access to infrared imaging through a home inspection service, uneven hot spots can reveal hidden performance issues.
We recommend pairing roof replacement with ventilation and insulation improvements whenever the attic is underperforming. That approach often gives you a better return than simply swapping shingles, and it may help you qualify for utility-backed energy programs tied to whole-home efficiency upgrades.
8) Mold, rot, or insect damage in the attic
Mold, decayed wood, and insect activity are strong signs that moisture has been present for too long. These problems don’t stay isolated. Once roof sheathing begins to soften or darken, fastening strength drops, replacement scope expands, and indoor air concerns may follow.
The health side matters too. The EPA provides guidance on moisture and mold, since visible growth can affect indoor air quality and signal persistent water intrusion. Visible attic mold significantly increases the chance that sheathing replacement will be needed, even in cases that otherwise looked like a routine leak repair.
Here’s a hypothetical worth planning around: a homeowner notices minor termite damage near the attic that, combined with mold growth, turns what looked like a straightforward reroof into a larger structural and ventilation project. In cases like that, the scope can expand to include roof replacement, localized framing repair, new sheathing, and permit review for structural work — a very different project than replacing shingles alone.
If you find mold or suspect pest damage, avoid disturbing contaminated materials, document what you see, and arrange a licensed inspection. We recommend handling moisture control, ventilation correction, and any structural repair as part of the same project, so the new roof isn’t installed over an unresolved problem.
How to do a safe 10-point roof inspection at home
If you want a practical way to screen your roof without climbing it, use this routine. It works well in spring after winter weather and again in fall before freezing temperatures return. It also helps you spot trouble early and apply the warning signs above to your own house in a safer, more organized way.
- Start with a full ground-level walkaround. Stand back far enough to see each roof plane. Look for sagging lines, missing shingles, dark patches, or visible unevenness.
- Use binoculars for a closer look. Check for curling, blistering, exposed mat, lifted tabs, and flashing separation. If you see widespread wear, note which slopes are worst.
- Inspect gutters and downspouts. Look for granules, shingle fragments, and overflow staining. Heavy grit after storms is a common sign of a roof nearing the end of its life.
- Check ceilings inside the house. Note stains, bubbling paint, and musty odors. Mark locations so you can compare them to attic observations.
- Inspect the attic during daylight. Bring a flashlight. If you see light through the deck, stop and call a professional immediately.
- Check insulation and moisture. Look for damp insulation, mold spots, or compressed areas. These can point to leaks or poor ventilation.
- Review flashings around chimneys and walls. Use binoculars outside or inspect from attic areas when visible. Rust, gaps, and displaced pieces often lead to repeat leaks.
- Look at vents, soffits, and fascia. Blocked soffits or damaged ridge vents can shorten roof life. Rot on fascia boards may mean water is backing up at the edge.
- Document age and permit history. Pull old invoices, permit records, and home sale papers. If you can’t find a clear install date, ask your township building department for permit records, or ask your contractor to help estimate the roof’s age from materials and construction details.
- Take dated photos and create a simple log. Save images by roof slope and write down what changed after storms or seasons. That record is useful for contractors, insurers, and permit applications.
Never walk a steep, wet, icy, or visibly damaged roof yourself. Stop the inspection right away if you see structural movement, active heavy leaking, or daylight through the decking. Use the checklist to gather evidence, not to take risks. Done regularly, this routine turns a vague worry into a clear, documented decision.
Repair or replace: how to decide, and common myths
Many homeowners hope a few repairs will buy several more years. Sometimes that’s true. If damage is isolated, affects a small portion of the roof, and the deck is structurally sound, patching may be reasonable. But when wear is widespread, leaks are recurring, or the roof is near the end of its service life, repair costs start stacking up without solving the root problem.
A common myth is that replacing one section always saves money. It can, but only when the remaining shingles still have useful life and can be integrated reliably. Another myth is that if water is only entering in one place, the rest of the roof must be fine. In practice, one leak often exposes broader underlayment or flashing failure, especially in older homes where the whole roofing assembly has aged together.
Life-cycle math matters. Repeated minor fixes over several years can add up to a substantial share of what a full replacement would cost, while still leaving you with a short remaining roof life. Add code-related upgrades, permit requirements, and possible insurance complications, and the balance can shift further toward replacement. That’s where the warning signs covered in this guide become useful as a decision threshold rather than just a checklist.
Get at least two detailed estimates and compare the actual scope:
- Tear-off layers
- Underlayment type
- Ice and water shield locations
- Ventilation upgrades
- Flashing replacement
- Disposal and cleanup
- Permit handling
If several warning signs apply to your roof, ask each contractor to explain why repair would or would not hold up long-term. That written explanation often reveals which proposal is realistic and which one is simply cheaper on day one. Isaac and Son provides free in-home estimates and can walk you through this comparison in plain terms before you commit to either path.
Costs, timelines, permits, and construction codes
Once a few of the warning signs above start showing up, cost and timeline are usually the next questions homeowners want answered. The total for a roof replacement depends heavily on size, roof pitch, number of valleys, chimney and flashing details, whether decking needs to be replaced, and the materials you choose. Rather than guessing at a price range, ask your contractor for a free written estimate that spells out every line item.
A basic cost breakdown often looks like this:
- Materials: shingles, underlayment, ice barrier, nails, vents, flashing
- Labor: tear-off, prep, installation, detailing, cleanup
- Disposal: dumpster, hauling, dump fees
- Permit fees: township-specific charges
- Repairs: sheathing, fascia, structural corrections if found
Timeline matters as much as price. Permit review time varies by township, and your contractor can tell you what to expect once they know your municipality. The actual reroof is often completed in a day or two for straightforward homes, but sheathing or structural issues can add time. On older homes especially, work can pause after tear-off if hidden deck damage is found and needs to be inspected or approved before the job continues.
Permit requirements vary by town, but the NJ DCA / Uniform Construction Code is the right starting point for understanding what applies to your project. Full replacement, structural changes, flashing upgrades, and sheathing replacement often require a formal permit submission. A typical permit package includes homeowner information, a property identifier, prior permit history if available, the contractor’s license number, and a clear written scope of work. If your inspection points to major structural repairs, ask your township whether they’ll want photos, sketches, or engineering input before you submit.
The practical lesson: the lowest bid doesn’t always include permit administration, disposal, or code-required upgrades. When comparing proposals, make sure each contractor explains the full process from tear-off to final inspection, especially if you’ve already found signs of leaks, sagging, or attic decay that point to hidden damage.
How to vet a roofing contractor before you hire
The right contractor does more than install shingles — they help you verify scope, code compliance, schedule, and accountability. That matters even more when your roof shows several warning signs and the job may uncover hidden damage once tear-off begins.
Use this checklist when comparing companies:
- Confirm the contractor holds a valid NJ Home Improvement Contractor registration.
- Ask for proof of general liability and workers’ compensation coverage.
- Verify who pulls the permit and who attends inspections.
- Ask whether the work is done by one accountable crew or subcontractors.
- Request a fixed-price written proposal with line items.
- Confirm the exact roofing brand and product line.
- Ask how flashing, valleys, and penetrations will be handled.
- Review the ventilation plan.
- Confirm disposal, site protection, and cleanup procedures.
- Request references from homeowners in your area.
- Read warranty terms for both labor and materials.
- Check complaint history through public sources.
For verification, homeowners can review state consumer information through the NJ Division of Consumer Affairs and business complaint records through the Better Business Bureau. It helps to write down each contractor’s answers during the estimate visit so you can compare them side by side afterward.
Isaac and Son Construction is one example of what you should expect a contractor to provide: a family-owned operation with 30+ years of experience, NJ HIC License #13VH01304900, transparent fixed pricing, one accountable crew with no subcontracting, and service throughout Bergen County and northern New Jersey. If you’re collecting estimates, ask every contractor the same questions and insist on clear written scope before you sign anything.
Energy-efficient materials and available incentives
Roof replacement isn’t only about stopping leaks. It’s also a chance to improve efficiency, reduce heat gain, and plan for years of trouble-free ownership. Material choices now include architectural shingles with better wind ratings, reflective roof systems, metal roofing, and solar-ready assemblies that work well with future energy upgrades.
Performance depends on the whole assembly, not just the shingle. A premium product alone won’t fix poor ventilation or thin insulation. That’s why the warning signs covered in this guide often overlap with comfort complaints and high summer cooling bills. Homeowners tend to get the best long-term value when they combine reroofing with attic air sealing, balanced intake and exhaust ventilation, and targeted insulation upgrades.
For incentives and guidance, start with Energy.gov and New Jersey’s clean energy program resources. These can help you review eligibility for efficiency upgrades tied to insulation, air sealing, or broader home performance improvements. Remodeling and building-industry resources also provide useful context on how material upgrades affect resale value.
Recycling is worth asking about too. Asphalt shingle recycling can reduce landfill use, though availability varies by hauler and facility. When landfill tipping fees are high, recycling-related waste handling can sometimes trim disposal costs as well. If you’re already weighing a roof replacement, ask each bidder whether they separate recyclable tear-off materials, what documentation they provide, and whether upgraded materials might help support rebate or energy-program paperwork.
A simple incentive checklist includes product specifications, contractor invoices, permit records, before-and-after photos, and any efficiency test results required by the program administrator. Gather these items before the job starts, not after.
Two things most homeowners never think to ask
A) How a new roof affects resale value and insurance. Roof replacement is often judged only by its price, but buyers, appraisers, and insurers treat a new roof as risk reduction. Cost-vs-value reporting from industry publications has consistently shown that exterior replacement projects recover a meaningful share of their cost at resale, especially when they improve curb appeal and reduce buyer objections. In competitive local neighborhoods, a documented new roof can also reduce the chance that a buyer asks for a credit late in the transaction.
Insurance can shift too. A newer roof may improve insurability compared with an older one already showing several of the warning signs discussed here. Premium impact varies by carrier, but age, storm resistance, and claim history all matter. Homeowners preparing to sell often choose replacement not because the old roof is leaking today, but because a near-end-of-life roof weakens both pricing power and buyer confidence.
B) Best timing for roof replacement in a four-season climate. In northern New Jersey, late spring, early summer, and early fall are usually the easiest windows for reroofing. Weather is more stable, attic work is safer, and township inspection schedules tend to be more predictable than during winter emergency conditions. That said, the ideal schedule depends on permit timing and whether your project overlaps with other work, such as a deck, siding, kitchen, or whole-home renovation.
Staging matters most when projects overlap. On a coordinated roof-and-kitchen remodel, for example, permit sequencing and site protection have to be managed carefully to avoid rework, protect deliveries, and meet township inspection milestones. Contractors with broader remodeling experience — one that handles roofing, decks, additions, flooring, basements, and whole-home work — can usually plan this kind of staging more effectively than a roofing-only crew. If you’ve spotted signs that your roof needs replacing, timing that work ahead of another major renovation can prevent damage and avoid paying twice for the same fix.
Next steps and how Isaac and Son can help
If your roof is showing multiple symptoms, don’t guess. Work through a short decision sequence and document everything. That approach turns stress into a manageable plan and helps you decide whether you’re looking at a repair, a timed replacement, or an urgent structural issue. The signs covered in this guide are most useful when you pair them with records, photos, and permit awareness.
- Complete the 10-point inspection and save dated photos.
- Confirm the roof’s age using records, permits, and disclosures.
- Check township permit requirements before authorizing work.
- Get fixed-price written proposals that include permit handling, tear-off scope, ventilation, disposal, and flashing details.
- Schedule the project in a favorable weather window and confirm inspection timing.
If you’d like help evaluating the signs above, Isaac and Son Construction can provide a licensed inspection and a permit-managed proposal for homeowners throughout Bergen County and northern New Jersey. Call (201) 474-2404 to set up a free in-home estimate. The company is licensed under NJ HIC License #13VH01304900 and brings 30+ years of experience with roofing and broader residential remodeling work.
For general background, the NJ Department of Community Affairs and the U.S. Department of Energy both publish useful guidance on building codes and energy-efficient roofing materials.
If several of the signs described above apply to your home, it’s worth acting before the next season forces a rushed decision. That’s usually the difference between a planned project and an emergency one. You can learn more about our roof replacement services.
Key Takeaways
- If your roof shows multiple warning signs at once—especially age, repeated leaks, granule loss, or attic damage—replacement is often more cost-effective than repeated repairs.
- In Bergen County and northern New Jersey, roofing decisions are shaped by older housing stock, four-season weather, permit enforcement, and NJ Uniform Construction Code requirements.
- A safe ground-and-attic inspection, backed by photos, roof-age records, and permit checks, gives you the evidence you need before calling contractors or filing an insurance claim.
- Compare at least two detailed written proposals that include tear-off scope, flashing, ventilation, underlayment, disposal, and permit handling—not just a low price.
- When structural issues, mold, sagging, or daylight through the deck appear, stop troubleshooting and call a licensed contractor immediately.
Frequently Asked Questions
Can I replace only part of my roof?
Sometimes, yes. Partial replacement can make sense when damage is isolated to a small section of the roof and the roof deck is still sound. If multiple slopes are failing, the shingles are near the end of their life, or you’re seeing several of the warning signs described above, a full replacement is usually the better long-term decision.
Will Insurance Cover My Roof Replacement?
Insurance may cover roof replacement when damage is tied to a sudden covered event such as wind, hail, or a falling tree limb. Carriers usually look at roof age, maintenance history, storm documentation, and the adjuster’s findings before approving full replacement versus repair.
How long should a roof last in New Jersey?
Many asphalt shingle roofs last two to three decades depending on shingle type, ventilation, weather exposure, and installation quality. In northern New Jersey, freeze-thaw cycles, ice dams, and summer storms can shorten real-world lifespan if maintenance is poor.
Do I need a permit to replace my roof?
A permit is often required for full reroofing, structural repairs, and work that triggers code-related upgrades under local enforcement of the New Jersey Uniform Construction Code. Because township rules can vary, always confirm with your local building department before starting work, or ask your contractor to handle the permit process on your behalf.
When should I call a pro instead of patching?
If you see daylight through the roof deck, active sagging, interior leaks after rain, or signs of structural rot, call a licensed contractor right away. Those symptoms can move from repairable to unsafe quickly, especially during storm season or freezing weather.
See how we have helped neighbors throughout the region in our recent remodeling projects.
Planning a project? Isaac and Son is a family-owned, licensed general contractor serving Bergen County for over 30 years. Request a free in-home estimate or call (201) 474-2404.
